When assembled, this kit will replace the displays used on Williams System 6A, 7, or System 9 pinball machines that use the C-8363/C-8364/C-8365 display. This kit replaces all 5 displays used on these machines. Note, this display cannot be mixed with the original displays and must be replaced as a set. This display kit is NOT COMPATIBLE with machines that use more than 5 displays e. This display kit is NOT COMPATIBLE with system 9 systems that use the D-10749 control board e. Comet’ without adapters for the wiring connections. See picture number 5 to ensure that your board looks similar. This is a direct replacement for the original high voltage gas discharge displays and uses the existing wiring without modification. These new displays use low voltage, cool LEDs and will operate even if the high voltage power supply on your pinball machine does not work. >>>>> This comes as a kit of parts. >>>>> It must be assembled before it can be used. >>Inquire about availability of. This is a kit. That requires basic solder assembly before it can be used. Everything you need to build the displays is included except for solder. Only basic “old school” through hole parts are used, no surface mount parts for easy assembly. Note that the cables shown in the picture are not included in this kit. See the assembly instructions here. Link to Assembly Instructions. This is believed to be an accurate list of machines with displays compatible with this replacement. Since we are unable to test this board in every configuration, we take no responsibility for any errors. However, we do welcome feedback as to any errors that are found so that we can update this list. Black Knight Limited Edition. Comet Important; Most Comet machines were produced with D-10749 master board instead of the C-8363 control board. This kit IS NOT compatible with machines that have the D-10749 master board Inquire about kits for the D-10749 controller. The item “Williams System 6A, 7 or 9 DIY Display kit Wolffpac Orange digits” is in sale since Monday, April 29, 2019. This item is in the category “Collectibles\Arcade, Jukeboxes & Pinball\Pinball\Replacement Parts”. The seller is “wolffpac” and is located in Hockessin, Delaware. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Switzerland, Norway, Ukraine, Croatia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
- Original/Reproduction: Reproduction
- Brand: Wolffpac Tech
