Grabo Pro-Lifter electric suction cup is equipped with a robust vacuum pump. The foam rubber vacuum seal on the Grabo Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lb. To lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The Grabo Pro Vaccum Pump automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored. The Grabo Pro-Lifter electric cup has been rigorously tested by professionals around the world. Portable and Handy: The Grabo Pro-Lifter electric suction cup is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of Heavy Lifting Made Easy, the Grabo Pro is equally effective on smooth as well as coarse surfaces. Pumping Capacity: The Pro-Lifter has a pumping capacity of 20 liters per minute, a best-in-class. So, say goodbye to unreliable, and often dangerous, manual suction cups for the job. With Grabo Pro-Lifter electric suction cup you double your work efficiency with enhanced safety. Versatile and Rugged: The tool is designed to provide a better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous, or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals, and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle. Digital Display: The handle is also equipped with a digital display that shows the maximum weight that the Grabo Pro-Lifter can safely lift at that very moment. The weight is displayed in both pounds and kg. Removable Battery: The tool operates on 14.8 volts 2600 mAh Li-ion removable battery. The battery takes two hours for a full charge. On a full charge, this powerful battery can last for 900 cycles or 1.5 hours on non-stop running. The battery lasts for a whopping 30 days in standby mode. GRABO PRO-Lifter 20 kit includes. GRABO Pro-Lifter comes as a complete unit, with pre-installed battery and vacuum seal. That is not all. There are other accessories in the kit, including a multi-socket charger and a heavy duty carry bag. The complete kit is packaged in a functionally designed colorful box. 1 GRABO Pro tool (2021 model with digital display). 1 seal (preinstalled on the tool). 1 battery (preinstalled on the tool). 1 tough Oxford fabric carry bag. Operator’s manual in English. Model/SKU: GRABO PRO-LIFTER 20 / GP-1Li-FB. Battery: 14.8VDC 2600mAh Li-ion. Charger Input Voltage: 100VAC 60Hz. Pump Service Life : 100000+ ON-OFF cycles / 800+ hrs continuous. Rated Air Flow : 0.7cfm (20 L/min). Maximum Vacuum Rate :11.6Psi (0.8 Bar, 80 kPa). Maximum Lifting Capacity :375Lbs (170 kg). L x W x H :11.77 x 7.22 x 4.76 (300 x 184 x 121 mm). Net Weight (With Battery) :3.2Lbs (1.5 kg). Working Temperature :32°F140°F (0°60 °C). Applicable Surface Type :Peak/valley heights less than 0.1 (3mm), arc less than 5°. Additional Features : Pump stops automatically at maximum vacuumrate (11.6Psi / 0.8 Bar).
